<p>This is a reproduction of a book published before 1923. This book may have occasional imperfections such as missing or blurred pages, poor pictures, errant marks, etc. that were either part of the original artifact, or were introduced by the scanning process. We believe this work is culturally important, and despite the imperfections, have elected to bring it back into print as part of our continuing commitment to the preservation of printed works worldwide. We appreciate your understanding of the imperfections in the preservation process, and hope you enjoy this valuable book.</p>

Oxy-Acetylene Welding and Cutting: Electric, Forge and Thermit Welding, Together with Related Methods and Materials Used in Metal Working and the Oxygen Process for Removal of Carbon

Manly, Harold Phillips

Science & Math

Nabu Press

This is a reproduction of a book published before 1923. This book may have occasional imperfections such as missing or blurred pages, poor pictures, errant marks, etc. that were either part of the original artifact, or were introduced by the scanning process. We believe this work is culturally important, and despite the imperfections, have elected to bring it back into print as part of our continuing commitment to the preservation of printed works worldwide. We appreciate your understanding of the imperfections in the preservation process, and hope you enjoy this valuable book.

Automobile Ignition: Operation, Upkeep, Care and Repair of Modern Forms of Storage Battery and Magneto Ignition Equipment for Automobiles

Technology

Automobile Starting and Lighting: A Non-Technical Explanation of the Construction, Upkeep and Principles of Operation of the Electrical Equipment of Automobiles

Automobile Ignition: Operation, Upkeep, Care and Repair of Modern Forms of Storage Battery and Magneto Ignition Equipment for Automobiles -

This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work.This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work.As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

Oxy-Acetylene Welding and Cutting: Electric, Forge and Thermit Welding, Together With Related Methods and Materials Used in Metal Working and the Oxygen Process for Removal of Carbon

Sagwan Press

Excerpt: ... to a proper temperature the opening to be filled is exposed so that the torch flame can reach it, while the remaining surfaces are still protected from cold air currents and from cooling through natural radiation. One of the commonest methods and one of the best for handling work of rather large size is to place the piece to be welded on a bed of fire brick and build a loose wall around it with other fire brick placed in rows, one on top of the other, with air spaces left between adjacent bricks in each row. The space between the brick retaining wall and the work is filled with charcoal, which is lighted from below. The top opening of the temporary oven is then covered with asbestos and the fire kept up until the work has been uniformly raised in temperature to the desired point. When much work of the same general character and size is to be handled, a permanent oven may be constructed of fire brick, leaving a large opening through the top and also through one side. Charcoal may be used in this form of oven as with the temporary arrangement, or the heat may be secured from any form of burner or torch giving a large volume of flame. In any method employing flame to do the heating, the work itself must be protected from the direct blast of the fire. Baffles of brick or metal should be placed between the mouth of the torch and the nearest surface of the work so that the flame will be deflected to either side and around the piece being heated. The heat should be applied to bring the point of welding to the highest temperature desired and, except in the smallest work, the heat should gradually shade off from this point to the other parts of the piece. In the case of cast iron and steel the temperature at the point to be welded should be great enough to produce a dull red heat. This will make the whole operation much easier, because there will be no surrounding cool metal to reduce the temperature of the molten material from the welding rod below the...

Oxy-Acetylene Welding and Cutting

Literature & Fiction

Literary

HardPress Publishing

<p>Oxy-acetylene welding and cutting. Electric, forge and thermit welding, together with related methods and materials used in metal working and the oxygen process for removal of carbon. This book, "Oxy-acetylene welding and cutting", by Harold Phillips Manly, is a replication of a book originally published before 1916. It has been restored by human beings, page by page, so that you may enjoy it in a form as close to the original as possible.</p>

Oxy-acetylene welding and cutting

Book on Demand Ltd.

See the best price to sell, buy, or rent books by Manly, Harold Phillips. BookScouter helps to compare book prices from 25+ online bookstores and 30+ buyback vendors with a single search.

Books by Manly, Harold Phillips