Uber Die Korperlichen Ausserungen Psychischer Zustande: Weitere Experimentelle Beitrage Zur Lehre Von Der Blutzirkulation in Der Schadelhohle Des Mens (English and German Edition)

Berger, Hans

Medical Books

Nabu Press

The references in this book are from the pages of my mother's journal.
The incidents described in my manuscript details our struggle fleeing the Nazis, the Russians, and the flight to the West. In the spring of 1944, Hitler's storm troops and allied forces attacked all of Germany and forced his radical policies on the citizens. Heidelberg was not exempt. The once peaceful city, the romantic section of town, its castle towering above as the guardian of the city, became a place of tyranny, murder and fear. I know this to be true. My name is Hans-Günter Berger, and I was there.
My sisters and I, born to a father forced into service and a mother whose disdain and open defiance to Hitler could not be ignored, became a target of the ruthless Gestapo ordered to break our bones.
While our father kept up the facade of compliance, our mother had no choice but to take her four children and flee romantic Heidelberg in the dark of night. As we arrived in former East Prussia, the childhood home of my mother, we were nearly crushed by the iron jaw of the Russian bear. Trapped behind enemy lines for more than a year, we felt the powerful paw bearing down on us from the far reaches of the Soviet Empire. Unspeakable mayhem ensued as the Russian shock troops came across the Prussian border.
I was only two years old, and my sisters five, seven, and the oldest nine when my mother, in order to flee Hitler's demons, we found ourselves caught in the midst of one of the biggest and bloodiest tank battle of the war.

A Bridge to Cross: The True Story of One Family's Flight from the Nazis

Biographies & Memoirs

Historical

Mirador Publishing

What is Wolfgang going to do after discharge from the US Navy? As he is adventurous he decides to enter uncharted waters. Selling encyclopedia door to door has to be the job of nightmares for most of us, but he excels, despite it all. Until, he is almost arrested... It's time for another change. Wolfgang is next employed by an industrial chemical company which turns into a living hell. Wolfgang neglects to read the user manual and an upscale restaurant is engulfed with deadly fumes and one man is almost burnt alive. Dealing with chemicals, Wolfgang is dealing with fire and it is just a matter of time until tragedy strikes again. It doesn't deter him however and he becomes the top producer in the country for which he is awarded a fabulous prize, a trip to Hawaii, all expenses paid. But trouble follows him wherever he goes. While in Hawaii, he is threatened with his life by a ruthless drug cartel and almost loses his life when he returns to the mainland. It's time to change course and he sees opportunities with the police. After the required schooling he begins to train police officers in the Western United States - an unpredictable profession. During the course of training the country's finest officers, he finds himself in grave danger during a Colombian drug cartel bust, a bank robbery in progress and a crazy woman who kidnaps Wolfgang at gun point. This is the life of a man who just never gave up.

New Bridges to Cross: One man's mission to forge a new life in America after escaping the Nazis

Professionals & Academics

Automating with the SIMATIC S5-155U

Science & Math

Physics

John Wiley and Sons Ltd.

The S5-135U is in the upper performance range of the SIMATIC S5 programmable controllers, and is used to implement industrial control systems for machine tools, manufacturing plants and industrial processes. The required open-loop and closed-loop control tasks are written in the STEP 5 programming-language, the assimilation and use of which is greatly simplified through the optional representation of these tasks as control system folwchart, ladder diagram or statement list. Description and use of this programming language is the main topic of this book. The book is directed to all users of SIMATIC programmable controllers. This includes not only beginners who want to familiarize themselves with the configuring of programmable controllers, but also experienced users, who will find a great deal of valuable information within its pages.

Automating with the SIMATIC S5-135U (Programmable Controllers)

Engineering & Transportation

Engineering

Publicis

SIMATIC S7 programmable controllers are used to implement industrial control systems for machines, manufacturing plants and industrial processes. The relevant open-loop and closed-loop control tasks can be solved using the STEP 7 programming software, which has been developed on the basis of STEP 5, with its various programming languages.  This book describes elements and applications of the command-oriented STL (statement list) programming language for use with both SIMATIC S7-300 and SIMATIC S7-400. It is aimed at all users of SIMATIC S7 programmable controllers. First-time users will be introduced to the field of programmable logic control whereas advanced users will learn about specific applications of SIMATIC S7 programmable controllers.  The enclosed disk contains all programming examples described in the book - and a few extra examples - also intended as exercises. The examples can be viewed, modified and tested using STEP 7.

Automating with STEP 7 in STL: SIMATIC S7 - 300/400 Programmable Controllers

Computers & Technology

Programming

SIMATIC S7 programmable controllers are used to implement control systems for machines, manufacturing plants and indsutrial processes. The relevant open-loop and closed-loop control tasks can be solved using the STEP 7 programming software, which has been developed on the basis of STEP 5, with its various programming languages. This book describes elements and applications of the graphic-oriented programming languages LAD (ladder diagram) and FBD (function block diagram) for use with both SIMATIC S7-300 and SIMATIC S7-400. It is aimed at all users of SIMATIC S7 prgrammable controllers. First-time users will be introduced to the field of programmable logic control whereas advanced users will learn about specific applications of SIMATIC S7 programmable controllers. The enclosed diskette contains many programming examples written in LAD and FBD and archived within block libraries. The examples can be viewed, modified and tested using STEP 7.

Automating with STEP7 in LAD and FDB: SIMATIC S7-300/400 Programmable Controllers (With Diskette)

Vch Verlagsgesellschaft Mbh

Automatisieren mit SIMATIC: Integriertes Automatisieren mit SIMATIC S7-300/400. Controller, Software, Programmierung, Datenkommunikation, Bedienen und Beobachten (German Edition)

Totally Integrated Automation is the concept according to which SIMATIC controls machines, manufacturing systems and processes. For the example of the S7-300/400 programmable controller the reader is given an overview of the functioning and design of a modern automation system. The book also provides an insight into configuring and parameterization of the controller and the distributed I/O, explains network communication and describes the possible methods of operating and monitoring a system. As the central automation tool, STEP 7 manages all the relevant tasks and at the same time integrates a number of text and graphics-oriented PLC programming languages. The readers can discover for themselves on reading the book which languages are offered and how these differ from each other. The book is very well suited to all those without extensive background knowledge who wish to obtain a good working knowledge of programmable controllers.

Automating with SIMATIC: Integrating Automation with SIMATIC S7-300/400, Controllers, Software, Programming, Data Communication, Operator Control, and Process Monitoring

SIMATIC S7 programmable controllers are used to implement industrial control systems for machines, manufacturing plants and industrial processes. The relevant open-loop and closed-loop control tasks can be solved using the STEP 7 programming software, which has been developed on the basis of STEP 5, with its various programming languages. This book describes elements and applications of the text-oriented programming languages STL (statement list) and SCL (structured control language) for use with both SIMATIC S7-300 and SIMATIC S7-400. It is aimed at all users of SIMATIC S7 programmable controllers. First-time users will be introduced to the field of programmable logic control whereas advanced users will learn about specific applications of SIMATIC S7 programmable controllers. The enclosed diskette contains many programming examples written in STL and SCL and archived within block libraries. The examples can be viewed, modified and tested using STEP 7.

Automating With Step7 in Stl and Scl: Programmable Controllers Simatic S7-300/400

See the best price to sell, buy, or rent books by Berger, Hans. BookScouter helps to compare book prices from 25+ online bookstores and 30+ buyback vendors with a single search.

Books by Berger, Hans